Dual Stereo Balun (in-wall)


Need to connect one or two stereo sources (such as a computer, media streamer, or CD player) located in one room to your whole-house audio system or home theater receiver located in another room? Want to share sources connected to a home theater receiver with your whole-house audio system, while simultaneously sharing what is playing in a nearby zone with that same home theater receiver?  Now you can over a single Cat5 (or higher) cable using a pair of our dual stereo baluns (connect one at each end of the cable).

Sold in Pairs; 1 = 1 pair
1 – 3$79.00
4 +$74.00
(0)No Reviews yet

This item is IN STOCK


Connect one or two source devices to a Balun at one end of the Cat5 or Cat6 cable, then connnect your whole-house audio controller or receiver to a Balun at the other end. The signal is sent without noise or electrical interference over a distance up to 500 feet.
One Balun is required at each end of the Cat5 or Cat6 cable.
Best Practice: If your whole-house audio system and home theater receiver are located apart from each other, run a Cat5 (or higher) cable between them.  Because our baluns provide for TWO stereo signals (sent in either direction), you can use one stereo input to send audio from the home theater receiver into the whole-house system, and you can use the other stereo input to send audio in the opposite direction from the whole-house system into the home theater receiver.  In this way, all of the sources connected to the home theater receiver are available to the whole-house audio system, and the source selected for a nearby zone becomes a source available to the home theater receiver and the speakers connected to it.


  • 2 RCA-type stereo connections for sending one or two line level signals across Cat5 or Cat6
  • No separate power supply necessary for distances up to 500 feet
  • Use two BALUN-RCA2-IW (one at each end) or combine with other another HTD balun model

Owner's Manual

Ratings & Reviews

No reviews available

Be the first to Write a Review