14 Gauge, 4-Conductor, Behind-the-Wall Speaker Cable

SKU CBL-PL4

When your setup requires installing your cable behind a wall or ceiling, this is the best cable to use in order to stay within USA building codes.  It is made of 99.99% Oxygen-free copper and includes a layer of foil shielding to prevent unwanted interference and hum induced by surrounding electrical wires.

The CL3-rated outer-jacket is UL listed and meets all building codes in the USA for fire retardancy.  It does not include the CSA mark and therefore may not pass inspection in Canada.

4-conductors are most often used to send an amplified stereo signal to two speakers which are in close proximity to one another or to a stereo volume control.

$116.00 to $528.00
(0)No Reviews yet

This item is IN STOCK

Details

Run this 4-conductor cable (+ and - for Left; + and - for Right) to a pair of speakers by running one cable to the first speaker and then continuing to the second. At the first speaker, you will strip back the outer protective jacket to reveal all four conductors inside. Then, cut and strip two of the conductors for the first speaker (+ and -). The other two cables continue (uncut) to the end of the cable to be stripped and connected to the second speaker.

 

4-conductor cable is also often used to run from your amplifier to a stereo volume control. Two 2-conductor cables are then used to continue the signal from the volume control to each speaker (one to the left speaker and one to the right speaker).

 

Speaker cable is made of individual strands of copper that are twisted together to result in the cable's thickness, or gauge. The lower the gauge, the thicker the cable, e.g. 14 gauge is thicker than 16 gauge. Generally speaking, thicker cable will result in less signal loss over a given length. We recommend using 14 gauge cable because it offers the best performance to cost ratio. While using thicker cable will, in theory, produce less signal loss, the difference is so insignificant that your ears will likely not be able to tell the difference.

 

It is also important to know the number of individual strands that are used to produce the overall gauge. Electrons will follow the path of least resistance which tends to be on the surface area of the copper. So the more individual strands used, the greater the available surface area, and thus less signal loss. Typical CL3-rated 14 gauge speaker cable that you'll find at consumer electronics stores is manufactured with a strand count of 16. In contrast, ours utilizes 63 individual strands of 99.99% oxygen free cable.

 

Some popular cable manufacturers also use this high strand count but they will cost you about double our prices simply because they sell through distributors and retailers. And with the recent rise in the price of copper (due to strong worldwide demand), the amount you'll spend wiring your home for sound has become a significant part of your home audio budget.

 

With HTD speaker cable you get the quality you need at a price that won't break your budget.

Specifications

  • 14 AWG (American Wire Gauge)
  • 63 individual strands of 99.99% oxygen free copper per conductor
  • Outside Diameter: 10mm
  • 4 conductors are color-coded in order to easily maintain polarity
  • Foil shield
  • CL3-rated protective outer-jacket, BLACK

Features

Ratings & Reviews

No reviews available

Be the first to Write a Review