This "peep hole" style IR receiving eye provides an inconspicuous option for passing IR commands to devices hidden out of sight. Connect directly to the IR-BLOCK4 or Lync. This eye can also be connected to the MC-66 and MCA-66 with the use of a 3-wire to 3.5 mm adapter (see bottom of page, sold separately).
Eye will visibly flash when receiving an IR signal.
Use this Infra-Red (IR) receiving eye to receive IR signals from an IR remote control. It connects to our IR-BLOCK4 distribution block and all of our whole-house audio controllers (adapter required for MC-66 and MCA-66). These devices pass IR signals to other nearby components (DVD players, cable boxes, receivers, etc.) so that these components can be located out of sight yet still be controlled.
Note that all of our keypads (KC6, KC7, LyncPad) already include a built-in IR receiver eye. The IR-RX2-T simply gives you an extra location, near the primary equipment to receive the IR signals.
This IR receiving eye is also compatible with the GW-IR3 and WGW-IR3 gateways.
- Cable Length: 2 meters (~6 feet)
- Connector type: bare wire
- IR frequency: <56 kHz