|
|
 |
 |
| IR-RX2-3 |
 |
Use this Infra-Red (IR) receiving eye to receive IR signals from an IR remote control. It connects to the back of our Lync controllers which pass the IR signals to other nearby components (DVD players, cable boxes, etc.) using the Global IR Output. This allows your IR components to be located out of sight yet still be controlled with IR remote controls.
Eye will visibly flash when receiving an IR signal. Item in Stock. Ships same day (M-F) if ordered by 2pm Central. |
|
|
|
|
|
The IR-RX2-3 includes a 2 meter (6 foot) cable for easy connection to our Lync whole-house audio controllers.
Note that every LyncPad already includes a built-in IR receiver eye. The IR-RX2-3 simply gives you an extra location, near the primary equipment, to receive the IR signals.
Note also that information received by the IR-RX2-3 is passed only through emitters connected to the Global IR Output on the back of the Lync controller. You can connect a dual emitter to the global output in order to pass IR information to up to two devices. If you need more, then you will need to connect the global IR out into a separate IR distribution box, such as our IR-BLOCK4.
Cable Length: 2 meters (~6 feet)
Connector type: bare wire (3)
IR frequency: <56 kHz
|
|
 |
 |
| ABOUT HTD |
| why our business model is better, our commitment to our customers, our history and location, . . . |
|
|
|
 |
|
| PLACING AN ORDER |
| what qualifies for free shipping, applying gift certificates, picking an order up at our location in Plano, TX, . . . |
|
|
|
|
|
|
|
|
|
|
|
Speakers
Amplifiers
Whole House Audio
Cables/Accessories
4.7/5.0 lifetime rating across all products. Read reviews here >>
